Xilinx FPGA Configration control LSI TE7725PF /inrevium

Products

	Video and Imaging LSI
	SD/SDIO/MMC Controller
	Xilinx Solution FPGA Evaluation Board Optional Board Configuration LSI IP Core for Xilinx FPGA
	General Purpose I/O

Contact

	Sales & Support Contact
	Rep & Distributor

Configuration LSI>>

Xilinx FPGA Configration control LSI

TE7725PF

[Release Schedule]
Mass Production Now

The inrevium TE7725PF is a second generation FPGA configuration control LSI. The TE7725PF is enabling to configure the Xilinx FPGA with a NOR flash memory on the board instead of using conventional PROMs. Up to 256Mbit flash memory is supported and both 2.5V/3.3V IO voltages are helpful for various kinds of Xilinx FPGA family.
With sharing a flash memory chip on the board both for CPU boot memory and FPGA configuration data, the TE7725PF helps to significantly reduce a board size and a total cost.
In addition, the TE7725PF supports the Master Select MAP mode, the configuration in a parallel interface for a high-speed configuration. This solution would be useful to reduce a configuration time for high-density FPGAs.

Features

	Supported Xilinx FPGA: Spartan-II/-IIE/-3/-3E Virtex/-E/-II/-II Pro/-II ProX/-4/-5		FPGA configuration mode: Master Serial Mode Master Select MAP Mode
	Supported Flash memory: Spansion 16Mbit to 256Mbit		FPGA configuration function for Xilinx FPGA
	Read/Write/Erase function for Flash memory		Flash memory address designation function by external setup pin
	JTAG instruction function		Status output function
	Power-on sequence control enable output function		TE7725Player interface function
	Core voltage 2.5V, IO voltage 2.5V/3.3V		100pin-QFP (Pb-Free and RoHS-compliant)

Examples

Case 1: Saving a board space and total cost

Case 2: Sharing a flash memory for CPU boot program and FPGA datas on the board

System Diagram

For more information contact:
Request

| Legal Infomation | Site Map |